DINORAUUUUUURRR

Thanks for the suggestions – a glass of wine was indeed had and everything is back in order – so here is the Heidi and Finn Hoodie version 3 – (a.k.a. the baby dinosaur!).  I’d have liked to model this on the baby, however as I’ve run out of black thread the front is pinned together, which is high risk for babies.  The baby isn’t mobile anyway, so “action shots” consist of variations of sitting.  And by variations I mean changes in flooring.  The sitting is pretty standardised.  Here we go!


This is a combination of the Heidi and Finn hoodie and the dinosaur tutorial circling the interwebs (and it’s so awesome how could it not) from here, here and then here.  Adding the little scales was super easy, and used up some red felt that is usually just used for tongues on stuffed animals.  Toy tongues are tiny, so there was shedloads left just dying to be used up.  If you’re wondering how much felt I needed for this, it was about half an A4 sheet and it’s a size 0 hoodie.

The hoodie just needs topstitching along the seams and down the front and a button sewn in, however I’ve run out of black thread.  Seriously.  I ran out of neutral thread earlier this week, swapped projects, walked 2km in the rain with the baby to get more, and then get home to realise I need more of the black.  *sigh*  It wouldn’t be a problem except, as you may very well know it’s rude to go to a fabric store and not buy fabric.  TRAGEDY.

This being the third in the series of baby hoodies, I’ve finally jigged the fabric and the techniques to get the desired results.  It’s not quite RTW quality, but that’s more due to not having an overlocker and some of the internal seams not as pretty as I’d like.  Some of the seams look a little wobbly at the moment but they just need a press and to be topstitched and they’ll look great.    The fabric is a jersey with approx. 50% stretch from Darn Cheap Fabrics in Heidelberg, with the lining being an interlock with approx 25%, with the waistband and sleeve bands also being the jersey.  In theory it shouldn’t work very well mixing the two fabrics, but so far the interlock gives it a bit of stability and holds a nice shape.  It might not wash up very well depending on how slack the jersey may go in the wash.  The only reason I mixed the two was I had interlock offcuts, and I was curious.  The fourth hoodie (yes, there is a fourth planned – kiddo is going to childcare a few days a week soon) is jersey outer and inner.  The comparison between the two will be interesting.

The ways I’ve altered the assembly of the hoodie

Sewing the lining and outer together (with right sides facing), flipping it inside out then attaching the waistband makes for a very bulky seam, that then needs to be topstitched down.  Instead I sewed the side seams together, then flipped it inside out.  Then on the right side I topstitched down one seam, changed to a long basting stitch along the bottom (sewing the outer and the lining wrong sides together) then as I hit the corner changed back to topstitching up the other side seam.  Once the front is then topstitched creating the overlap of the front panels I added the waistband.

I also changed the waistband and armband widths.  When you look at a normal jumper with waistbands and armbands they are slightly smaller than the arms/torso of the jumper.  By cutting them 10% shorter and gently stretching the arm band as you sew it to the jumper this gives you the narrower bands around your wrist.  It’s funny how you never think about why jumpers have arm bands and waistbands until you sew one.  This only really works with knits with a reasonable amount of stretch.  It wouldn’t work with the fleece unless you used a co-ordinating rib knit.

Interfacing where the buttonhole will be, just for a little extra stability in the buttonhole.  I cut a small piece about 3″x1.5″ and applied it to the wrong side of the lining.

The topstitching was done with a twin needle, which if you haven’t tried one is actually super easy.  Or is on my sewing machine.  It gives a little stretch as the bobbin does a zigzag pattern on the underside, but best of all the double lines is a bit visually deceptive and your stitching looks straighter.  As you subconsciously compare a line of stitching to the closest parallel line the twin needle is a winner.

Is it wrong to want one of these for yourself?

Advertisements

4 thoughts on “DINORAUUUUUURRR

What's your opinion?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s